Polycom SoundStation IP 7000 Setup Guide

Setup Guide for the Polycom SoundStation IP 7000 Phone
1 - 12
The following figure shows a two-phone setup with one Polycom HDX
Microphone Array (the maximum number you can attach for this setup).
Connecting Optional Auxiliary Audio Components
You can connect various auxiliary audio components, such as wireless (lapel)
microphones, speakers, and recording devices and computers (to record
phone calls) to your phone. You can also connect your conference phone to
audio from a mobile phone or a computer calling application. You connect
audio components to one of the following connectors:
• 2.5mm audio connector on your conference phone—to hear audio from
mobile phones and computer calling applications.
To connect a mobile phone to your conference phone, you require the
optional Mobile Phone Cable. To connect a computer calling application
to your conference phone, you require the optional Computer Calling Kit
(containing a Computer Calling Cable).
• Audio connectors and ports on the Multi-Interface Module—to connect
wireless (lapel) microphones, speakers, and recording devices and
computers (to record phone calls).
To connect audio components to the Multi-Interface Module, see your
system administrator.
Multi-Interface
Module
Console Interconnect Cable
12-foot
Network Cable (10-pin)
25-foot
Network Cable
Power Adapter

Polycom SoundStation IP 7000 Specifications

General

Frequency range	160 - 22000 Hz
Telephone dynamic range	85 dB
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	1080 g
Dimensions (WxDxH)	394 x 372 x 73 mm