3. Enter another contact's number or select a contact from Contacts or Recent Calls.
The contact is added to the conference call after answering.
Merge Calls into a Conference Call
You can merge an active call and a held call to initiate a conference call.
Procedure
1. In the Calls screen, tap a held call.
2. Tap Merge
.
The held call is merged with the active call and a conference call is initiated.
Add Participants to a Conference Call
You can add up to four contacts to a conference call.
Procedure
1. During a conference call, tap Add Participants.
2. Enter a contact's number or select a contact from Contacts or Recent Calls and select Dial.
The contact is added to the call after answering.
End a Conference Call
By default, when you end a conference call, your connection to the call ends and the other participants in
the conference remain in the call.
However, your system administrator can set up your phone so that all connections terminate when you
end a conference call.
Procedure
1. During a conference call, select Hang Up.
Hold a Conference Call
When you place a conference call on hold, you place all conference participants on hold.
Procedure
1. Select Hold.
Conference Calls
Smart Choice Communications | (800) 217-3096 | www.smartchoiceus.com | techsupport@smartchoiceus.com
© 2019 Smart Choice Communications, LLC
To Next Page
Loading...
Need help?
General
