3-20
3 First Steps
3.4.1 Connecting the Hardware
Front-end to PC
1. Plug the yellow network cable into the
CONTROL
network connection on
the back of the front-end and into the
CONTROL
network connection on
the back of the PC.
2. Plug the generator cable into the
GENERATOR IN
Sub-D connection on the
back of the front-end and into the corresponding
GENERATOR
SMB jacks
(
GEN_Ch0
and
GEN_D0
) on the back of the PC.
3. For cable shielding, plug the
SHIELD
blade receptacle on the generator
cable into the blade connector on the PC housing.
4. To synchronize the generator board with the data acquisition board, plug
the SMB-SMB connecting cable into the
Ck
SMB jack of the data
acquisition board and into the
Ck
SMB jack of the generator board.
5. Plug the Acquisition cable into the
ACQUISITION 2MHz
SCSI plug
connection on the back of the front-end and into the
ACQUISITION
SCSI
plug connection on the back of the PC.
Front-end to
PSV-E-500
junction box
6. Plug the 3D-connecting cable (3D Connecting) into the
SCANNING SYSTEM
industrial-style connection on the back of the front-
end and secure the connection by turning the locking spindle clockwise
beyond the resistance.
7. Plug the 3D-connecting cable (3D Connecting) into the
FRONT-END
industrial-style connection on the back of the junction box and secure the
connection by turning the locking spindle clockwise beyond the
resistance.
Junction box to
scanning heads
8. Plug the main cables (Umbilical) into the
TOP
,
LEFT
and
RIGHT
industrial-
style connections on the back of the junction box and secure the
connections by turning the locking spindle clockwise beyond the
resistance.
9. Plug the main cables (Umbilical) into the industrial-style connections on
the back of the respective scanning head and secure the connections by
turning the locking spindle clockwise beyond the resistance.
Junction box to
PC
10. Plug the blue network cable into the
VIDEO
network connection on the
back of the junction box and into the
VIDEO
network connection on the
back of the PC.
PC peripherals
11. Connect up the mouse and the keyboard to the back of the PC.
12. Connect the monitor cable to the DisplayPort on the monitor and to one of
the
DP
Mini DisplayPorts on the back of the PC.
To Next Page
Loading...
Need help?
General
