Polytec PSV-I-500 - Technical Specifications; Front-End Specifications

7-1
7 Technical Specifications
7 Technical Specifications
7.1 Harmonized Standards Applied
7.2 Front-End
7.2.1 General Data
Mains Connection
Ambient Conditions
Housing
Laser safety: IEC/EN 60825-1:2008-05
(Safety of Laser Products, complies to US 21 CFR
1040.10 and 1040.11 except for deviations pursuant
to Laser Notice no. 50, dated 24 June 2007)
Electrical safety: IEC/EN 61010-1:2011-07
(Safety requirements for electrical equipment for
measurement, control, and laboratory use)
EMC: IEC/EN 61326-1:2013-07
(EMC requirements on Emission and Immunity -
Electrical equipment for measurement, control, and
laboratory use)
Emission: Limit Class A
IEC/EN 61000-3-2 and 61000-3-3
Immunity: IEC/EN 61000-4-2 to 61000-4-6
and IEC/EN 61000-4-11
Mains voltage: 100…240 VAC ±10%, 50/60 Hz
Power consumption: 200 VA
Fuses: 3.15 A/slow-blow
Protection class: 1 (protective grounding)
Operating temperature: +5 °C…+40 °C (41 °F … 104 °F)
Storage temperature: −10 °C…+65 °C (14 °F … 149 °F)
Humidity: max. 80%, non-condensing
Protection rating: IP20 (according to EN 60529)
Dimensions (w x h x d): Without angle brackets:
450mmx150mmx380mm (19", 84HP/3U)
With angle brackets:
485mmx 150mmx380mm (19", 84HP/3U)
Weight: 10 kg