Polytec PSV-I-500 - Index

i
Index
Numerics
10-32 UNF-2B, connection on the scanning
head
3-10
A
ACQUISITION
connection on PC
3-7
connection on the front-end 3-4
air humidity
specifications PSV-E-500 junction box
7-13
ambient conditions
front-end specifications
7-1
operation and storage 1-2
PC specifications 7-14
scanning head specifications 7-15
specifications PSV-E-500 junction box 7-13
aperture of the laser beam, on the scanning
head
3-9
applicable standards
electrical safety
1-10
laser safety 1-7
applied, standards
declaration of conformity
C-1
applied, standards (specifications) 7-1
approach for troubleshooting 6-1
area of application 2-1
assembly
scanning head on VIB-A-T02
3-14
system cabinet 3-15
warning label for assembly, on the scanning
head
3-11
AUX IN
jack on the front-end
3-3
specifications 7-2
AUX OUT
jack on the front-end
3-3
specifications 7-3
B
beam shutter
on the scanning head
3-9
use 5-1
block filter
PSV-A-445, on the zoom lens
A-4
PSV-A-HNeBF A-7
C
cabling
acoustic gate unit
A-1
external scanner control A-10
external trigger 3-24
function generator 3-24
main components 3-20
mains connection 3-24
reference signal 3-24
vibration sensor 3-23
calibration interval, recommended 7-2
CDRH Compliance Statement 1-7
cleaning
cleaning agents
1-3
warning notices 1-3
close-up unit
mounting thread, on the scanning head
3-9
CoherenceOptimizer, stand-off distances 4-7
components, other 1-3
configuration, optical B-2
CONTROL
network connection on PC
3-7
network connection on the front-end 3-4
control elements
front-end, back view
3-4
front-end, front view 3-2
PC (back view) 3-7
PC, front view 3-6
PSV-E-500 junction box, back view 3-5
scanning head, back view 3-10
scanning head, bottom view 3-11
scanning head, front view 3-9
video camera with standard lens A-2
video camera with zoom lens A-3
D
data acquisition, specifications 7-13
declaration of conformity C-1
decoder
Standard, specifications
7-3
Xtra, specifications 7-8
displacement acquisition, theory B-1
disposal 1-3
DV-04
introduction
2-3
metrological properties, Standard 7-3
metrological properties, Xtra 7-8
E
electrical safety
applicable standards and directives
1-10
notices 1-10
standards applied 7-1
warning notices 1-10
EMC, standards applied 7-1