User manual Pomac PLP Lobe pump
4 CE/PLP (1406) EN-12
DECLARATION OF INCORPORATION
(according to Annex II 1 B of the Machinery Directive (2006/42/EC – 1st Edition – December 2009)
Pomac bv
Feithspark 13
9356 BX Tolbert
The Netherlands
hereby declares completely under own responsibility that the pump mentioned below:
Model: Lobe pump
Type: PLP
Execution: bare shaft
Materials: 1.4404
to which this declaration refers to, is in conformity with the following standards:
Standards: EN-ISO 12100 parts 1 & 2
NEN-EN 60204 part 1
EN 809
The pump must not be put into service until the final machinery into which it is to be incorporated has
been declared in conformity with the provisions of this Directive (2006/42/EC), where appropriate.
Issued at Tolbert, 29th of December 2009
H. Poelstra
Managing Director
To Next Page
Loading...