User manual Pomac PLP Lobe pump
8 CE/PLP (1406) EN-12
2. Safety
2.1. General information
This manual provides information necessary to prevent the installer/operator from injury or
discomfort during installation and operation of this pump and to ensure the correct use and
reliable performance of this pump.
⚫ Read this manual thoroughly before installing, operating or servicing this pump.
⚫ Ensure that operators and maintenance staff are familiar with the contents of this manual
and with the instructions given.
⚫ Ensure that operators and maintenance staff are familiar with the symbols used.
⚫ Follow the instructions in this manual step by step.
⚫ Store this manual in a place that is known and accessible to any user.
2.2. Instructions
This manual contains instructions with regard to the safety of the user, the continued good
functioning of the pump and hints to facilitate certain actions or procedures.
These instructions are indicated with the following symbols:
Warning! Can cause injury to the user! Act strictly in accordance with the instructions
given!
! Caution! Can cause severe damage to the pump or bad functioning! Closely follow the
instructions given!
Note: Hint or instruction that can facilitate certain actions.
⚫ Issues which require extra attention are printed in bold.
2.3. Staff
All personnel, in charge of the installation, operation or maintenance and overhaul of the pump,
should have received the necessary training.
2.4. Changed application
⚫ Contact POMAC in case the pump is going to be used for other applications or in different
circumstances than those specified during the initial pump selection.
To Next Page
Loading...