User manual Pomac PLP Lobe pump
42 CE/PLP (1406) EN-12
8. Closing down
8.1. Dismantling
See paragraph 7.6 for dismantling instructions.
8.2. Storage
⚫ If the pump is going to be stored, the pump shaft must be rotated manually once a month.
⚫ If the pump is to be stored for a long period of time, it must be done so on a vibration-free
base.
! If the pump, which is going to be stored is equipped with a safety valve: Prior to storage
loosen the lock nut and turn the spring load set screw completely CLOCKWISE, using a
proper spanner, until the spring load is completely released!
8.3. Disposal
If the pump is to be disposed of, take care of the following items:
⚫ Clean the rotor case internally, it may still contain residual product.
⚫ Drain the oil from the gearbox.
⚫ Dispose of the pump using a company specialized in metal scrapping.
To Next Page