What to do if the indicators on POMCube iCAN NetZero Storage EMS modules are always solid red?
B
breillyAug 16, 2025
If the indicators on the EMS modules are constantly solid red, it could indicate a crash or damage. First, unplug the power supply of DV12 on the EMS and plug it back in after 5 seconds. If the issue persists, shut down the system.
A
Amanda ThompsonAug 19, 2025
What does it mean if the indicators on POMCube iCAN NetZero Storage EMS modules are always blinking green?
K
Kenneth FarrellAug 19, 2025
If the indicators on the EMS modules are constantly blinking green, there might be an issue with the router, an incorrect Wi-Fi password, or a change in the Wi-Fi network.
* Check the router status and reset it if necessary.
* Try re-configuring the network, ensuring the correct Wi-Fi password is entered.
* If the Wi-Fi network was changed, re-configure the network to reflect the new settings.