PR 9116 - Product Overview and Features; Advanced Features; Application; Technical Characteristics

9116 - Product Version 9116-003 5
UNIVERSAL CONVERTER
9116
• Input for RTD, TC, Ohm, potentiometer, mA and V
• Supply for 2-wire transmitters
• Active / passive mA output and relay output
• Can be supplied separately or installed on power rail, PR 9400
• SIL 2-certified via Full Assessment
Advanced features
• Configurationandmonitoringbywayofdetachabledisplayfront(PR4501);
process calibration, signal and relay simulation.
• Advancedrelayconfiguration,e.g.setpoint,window,delay,sensorerror
indication and power monitoring.
• Copyingoftheconfigurationfromonedevicetoothersofthesametypevia
PR4501.
• ReducedUoExdata<8.3Vforactiveinputsignals.
• TCinputswithinternalorexternalCJCforhigheraccuracy.
• Thedeviceautomaticallydetectswhetheritmustsupplyanactiveorapassive
current signal.
Application
• The device can be mounted in the safe area and in zone 2 / cl. 1 div. 2 and
receive signals from zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I/II/
III, Div. 1, Gr. A-G.
• Conversionandscalingoftemperature,voltage,potentiometerandlinear
resistance signals.
• Powersupplyandsignalisolatorfor2-wiretransmitters.
• Monitoringoferroreventsandcablebreakageviatheindividualstatusrelay
and/or a collective electronic signal via the power rail.
• The9116hasbeendesigned,developedandcertifiedforuseinSIL2
applications according to the requirements of IEC 61508.
Technical characteristics
• 1greenand1redfrontLEDindicateoperationstatusandmalfunction.1yellow
LED indicates relay status.
• 2.6kVACgalvanicisolationbetweeninput,outputandsupply.