To Next Page

To Previous Page

C842, C842i, C846, C846i Upright and Recumbent Cycle

Page 11

26. The message KEYBOARD TEST will be momentarily displayed. A representation of each

key on the keyboard will be displayed. Pressing a key will cause the representation to

change, indicating that the key is functioning normally. Test all of the keyboard keys in this

manner.

27. Press the SELECT key to continue to the heart rate test.

28. The Polar filtered heart rate will be displayed as P XX. Pressing the SELECT key will

toggle the display to the filtered heart rate, displayed as F XX. Pressing the SELECT key

again will toggle the display the unfiltered heart rate, displayed as U XX.

29. Press the RESET key to continue to the battery test.

30. The message BATTERY TEST will be momentarily displayed.

31. A message will scroll indicating that the optional external is or is not connected. Pressing the

SELECT key will cause a message to be displayed indicating the battery condition. Pressing

the SELECT key again will display the actual battery voltage as BATTERY XX.X.

32. Press the RESET key to continue to the RPM test.

33. The message RPM TEST will be momentarily displayed.

34. The message RPM PULSE will be momentarily displayed, followed by the actual RPM

reading.

35. Press the SELECT key to continue to the brake test.

36. The message BRAKE TEST will be momentarily displayed.

37. The message POWER BITS will be momentarily displayed, followed by the power bit

reading. The power bit reading will change in correspondence with any change in the

resistance level. Pressing the SELECT key will toggle the display to the resistance level.

38. The message RESISTANCE LEVEL will be momentarily displayed, followed by the current

resistance level setting.

39. Press the RESET key to exit the program.

Precor C842 User Manual

Questions and Answers: