C842, C842i, C846, C846i Upright and Recumbent Cycle
Page 14
Procedure 3.4 - Club Settings
1. For C846 version 1 units, set the on/off switch in the “on” position.
2. On all versions, you must continue pedaling while performing this procedure.
3. For C842 and C842i units, skip to step 23. For C846i and C846 version 2 units, skip to step
11. For C846 version 1 units, continue with step 3.
4. Enter the club settings by pressing keys RESET,5,6,5,1,5,6,5, sequentially.
5. Either U.S. STANDARD or METRIC will be displayed. Use either of the
or keys to
select the desired setting.
6. Press the ENTER key to continue.
7. The maximum workout time will be displayed. The maximum workout may be selected with
either of the
or keys. Press ENTER to continue.
8. The maximum workout time is displayed on the display window. The maximum workout time
is the maximum time a user is allowed to use the unit.
9. The maximum workout time is adjustable between 10 and 240 minutes. If you wish to
change the maximum workout time...
THEN... OTHERWISE...
Use the
or keys to select Continue with the next step.
the new maximum workout time;
then continue with the next step.
10. Press and hold the RESET key to exit the program.
11. Enter the club settings by pressing keys RESET,5,6,5,1,5,6,5, sequentially.
12. The display will momentarily read SET CLUB PARAMETERS.
13. The display will momentarily read SELECT UNITS.
14. Either U.S. STANDARD or METRIC will be displayed. Use the either of the
or keys
to select the desired setting.
15. The display will momentarily read SET MAX WORKOUT TIME.
16. The current maximum workout time will be displayed. Use either of the
or keys to
select the desired setting. The maximum workout time may be set between 1 and 240
minutes or no limit.
To Next Page
Loading...
Need help?
General
