C842, C842i, C846, C846i Upright and Recumbent Cycle
Page 15
17. The display will momentarily read SET MAX PAUSE TIME.
18. The current maximum pause time will be displayed. Use either of the
or keys to
select the desired setting. The maximum pause time may be set between 1 and 120
seconds.
19. The display will momentarily read SET RESISTANCE RANGE.
20. The current resistance rang setting will be displayed. Use either of the
or keys to
change the resistance range setting.
21. The change custom program section of the program will be available. follow the screen
prompts to change the custom course if desired, otherwise continue with step 18.
22. Press the ENTER or RESET key to exit the program.
23. Enter the club settings by pressing keys RESET,5,6,5,1,5,6,5, sequentially.
24. The display will momentary read SELECT UNITS, followed by either U.S. STANDARD or
METRIC. The
or keys will toggle between the two measurement standards. When
the desired unit of measure is selected, press the SELECT key to continue to maximum
workout time.
25. The display will momentarily read SET MAX WORKOUT TIME, followed by the current
maximum workout time setting. The
or keys will allow you to set the maximum
workout time between 1 and 99 minutes or no limit. Press the SELECT key to continue to
maximum pause time.
26. The display will momentarily read SET MAX PAUSE TIME, followed by the current
maximum workout time setting. The
or keys will allow you to set the maximum
workout time between 1 and 120 seconds.
27. Press the ENTER or RESET key to exit the program.
To Next Page
Loading...
Need help?
General
