Precor P80 Service Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 39
Test
Equipment
Description
Brake Test
AMT, RBK,
UBK, EFX
1 Touch
Brake Test
, then Touch
START
.
2 Use the machine control paddle to change the resistance
up and down. The resistance changes will be displayed in
power bits.
3 Touch
STOP
to end the test. Touch 
BACK
to
Systems
Test
.
Battery Test
AMT, RBK,
UBK, EFX
1 Touch
Battery Test
, and then Touch
START
.
2 The console will display the voltage of the battery.
3 Touch
STOP
to end the test. Touch 
BACK
to
Systems
Test
.
SPM
AMT, EFX
1 Touch
SPM Test
, and then
START
.
2 The console will display Pulse. The pulse is showing a
count of zero crossings from the generator. SPM shows a
software averaged version of pulse. An averaged pulse per
minute will display as Minimum and a Maximum pulse.
3 Touch
STOP
to end the test. Touch 
BACK
to exit to
Systems Tests
.
RPM Test
RBK, UBK
1 Touch
RPM Test
, and then
START
.
2 The console will display Pulse. The pulse is showing a
count of zero crossings from the generator. RPM shows a
software averaged version of pulse.
3 Touch
STOP
to end the test. Touch 
BACK
to exit to
Systems Test
.
Cross Ramp
EFX Only
1 Touch
Cross Ramp Test
, and then Touch
START
.
2 Use the machine control paddle to change the Cross
Ramp. The console will display the analog to digital (A/D)
and Glitches incline position number. Dynamic available
battery voltage to the lift system will be displayed.
3 Touch
STOP
to end the test. Touch 
BACK
to
Systems
Test
.

Precor P80 Specifications

General

Brand	Precor
Model	P80
Category	Music Mixer
Language	English