© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 73
Figure 51: Cloning Procedure- Save To USB
9 You will see a process bar and then Settings exported successfully to the USB drive displayed.
10 When the export operation is complete, Touch OK to return the Settings menus.
Figure 52: Settings Exported Successfully
11 The settings export is now complete and you can exit the service mode by touching the back arrow
until you get to the Welcome screen. Remove the USB Flash Drive only after the P80 is at the
Welcome screen.
12 Move the USB Flash Drive device with the saved settings to a P80 console that you would like to
import the saved settings to.
To Next Page
Loading...
