Precor Spinner Ride Series - Cleaning; Approved Cleaning Products; Cleaning Procedure

Cleaning
Only use the following approved cleaning products to safely clean and prevent damage to the
machine surfaces.
Approved Cleaning Products:
l General Equipment Surfaces:
o
1 part mild soap to 30 parts water (recommend Simple Green
®
cleaner or equi-
valent).
o
Athletic equipment cleaner, 9x7 pre-saturated wipes (ATHLETIX PRODUCTS).
o
Enivir O Safe oxygen enhanced cleaner or Enviro Safe glass and multitask
cleaner concentrate.
l Consoles and PVS
1
: a diluted solution of one part 91% Isopropyl alcohol to one part
water.
Cleaning Procedure
1. Wipe down equipment using a soft lint-free cloth using only the recommended cleaning
solution. Always spray cleaning solution directly onto the cleaning cloth and not directly
onto the equipment surface to avoid equipment damage due to excessive moisture.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
2. Rinse surfaces using a clean lint-free cloth dampened with water only.
3. Then completely dry with another clean lint-free cloth.
1
Personal Viewing System display.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 6
2 General Information
Cleaning