Precor Spinner Ride Series - Spinning Studio Console; About; Features

Spinning® Studio Console
About
The Spinning
®
Studio Console is used on the Precor Spinner
®
Ride™, Spinner
®
Shift™,
Spinner
®
Rally™, and Spinner
®
Climb™ indoor cycles.
Refer to the SPINNING
®
STUDIO Owner's Manual for the latest console installation,
use, and service information.
l Operator's Guide
Features
l Battery Powered Console and Cadence Sensor: The console is powered by 3 -
AAA batteries and the Cadence sensor uses a CR2032 lithium coin cell battery.
l ANT+
1
connectivity: The console supports ANT+ wireless heart rate monitor chest
straps (however the Polar or Suunto ANT+ brand heart rate monitor chest straps are
not supported).
l Program Memory: The console maintains programming code during battery replace-
ment.
1
ANT+ (pronounced ant plus) is a wireless protocol for monitoring sensor data such as a per-
son's heart rate or a bicycle's tire pressure
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 63
7 Spinning® Studio Console
About