EasyManuals Logo

Precor Spinner Ride Series User Manual

Precor Spinner Ride Series
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Leveling Adjustment Procedure
Use this procedure to level the bike. Make sure the bike is level and sits firmly on the floor
before allowing anyone to use the bike.
IMPORTANT: Place the unit on a flat surface. Rotating the adjustable feet does not
compensate for extremely uneven surfaces.
Leveling the bike
1. Tighten all four leveling feet to fully lower the bike.
2. Try to rock the bike. If there is any movement, tip the bike to one side to locate the
adjustable feet.
3. Correct the height of each adjustable foot by turning it clockwise (+) to lower the bike, or
counterclockwise (-) to raise the bike.
4. When you are finished leveling the bike, place it on the floor. Recheck for movement
and readjust as necessary.
See Also
"Adjustment Procedures" on page9
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 16
4 Adjustment Procedures
Leveling Adjustment Procedure

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precor Spinner Ride Series and is the answer not in the manual?

Precor Spinner Ride Series Specifications

General IconGeneral
BrandPrecor
ModelSpinner Ride Series
CategoryExercise Bike
LanguageEnglish

Related product manuals