Introduction
Only Precor certified technicians are authorized to service Precor equipment. If you are not a
Precor certified servicer, you must not attempt to service any Precor product. Call your dealer
for service information
WARNING: This service documentation is for use by Precor certified servicer pro-
viders only. Personal injury can result from electrical shock and/or mechanical moving
parts.
This service manual applies to the SBK800-16 Spinner
®
Rally™, Shift™, and Ride™ indoor
cycle models. This document contains information required to service, repair, troubleshoot,
and maintain the bikes.
Spinner Bike Product Models
Spinner
®
Rally™ SBK861, SBK863
Spinner
®
Shift™ SBK841, SBK843
Spinner
®
Ride™ SBK821, SBK823
Additional Documentation
There is also an online web version if you have internet access at: Online Service Manual
See Also
"General Information" on page3
"Safety Guidelines" on page7
"Operation Verification" on page8
"Adjustment Procedures" on page9
"Replacement Procedures" on page17
"Troubleshooting" on page58
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 1
1 Introduction
To Next Page
Loading...
Need help?
General
