Precor Spinner Ride Series - Page 20

5.
Tighten the left and right axle nuts , torque to 29.5 ft-lbs (40 Nm).
6. Ride (pedal) the bike to verify there are no issues with the chain tension adjustment.
7. Replace the chain guard access panel.
8. Verify the bike operation per "Operation Verification Checklist" on page8 and return to
service
See Also
"Adjustment Procedures" on page9
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 15
4 Adjustment Procedures
Chain Drive Tension Adjustment