3. To remove the adjustment knob, use a thin wall 5/16' deep socket to hold the locking nut
from turning while loosening the adjustment knob. Keep light pressure on the adjust-
ment knob while loosening.
Installation instructions
1. Reinstall the handlebar adjustment knob in reverse order.
2. Reinstall the handlebar assembly and verify the handlebar adjustment knob operation,
see "Handlebar Assembly Replacement" on page31.
See Also
"Replacement Procedures" on page17
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 36
5 Replacement Procedures
Handlebar Adjustment Knob Replacement
To Next Page
Loading...
Need help?
General
