LUBRICATION AND SERVICING SCHEDULE
1. Service every 5,000 miles (8,000
km)
DESCRIPTION
Chassis
Air cleaner
Air Conditioning Compressor
{central system only)
SERVICE
LUBRICANT
Lubrication
Molybdenum disulphide grease
Inspect and clean, replace element
if required
Check
o
il
level in sight glass
A/C
compressor oil
Differential
Check
Oil - Keep to level
of
filler General purpose gear lubricant - SAE 140
plug
Fan Gear Box Check oil - Keep to level of filler H.D. engine oil - SAE 40
or
30
plug Cat
rear of gearbox
),
or
between
marks on dipstick, depending on the
model used on your vehicle
Engine Coolant
Check level - Keep to level of filler Engine coolant
neck
2. Service every 10,000 miles (16,000
km)
DESCRIPTION
Engine O
if
Engine Oil Filter
Fuel Strainer
Fuel Filter
Shutterstat Lubricator
Check
Air
Gages for Leaks
SERVICE
Drain and
Ref
W
Replace Element
Replace Element
Replace Element
Drain Filter Bowl
Add 1 ounce of Fluid
Check Steering and Accelerator Linkage
Check
all Lights and Switches
Tighten Wheel Nuts
Check
Cooling System for Leaks-Test Anti-Freeze ( - 32°F)
Remove and Clean Heater and
A/C
Filters
Operate and Reset Emergency Stop
Adjust Brakes
Drain
Air
Tanks
LUBRICANT
H.D. engine
oi
•,
SAE 40
or
30
(see page 20)
Shutterstat
fl
uid
39
To Next Page
Loading...
