47
printed in Vivid Graphics mode. Skin tones especially will look more natural in this
mode.
ICC Gloss Paper, ICC Gloss Polyester and ICC Matte Bopp are all ICC calibrated color
matching options. Select the setting that corresponds to your installed Primera media
of the same type to produce ICC color matched prints. Note: ICC monitor calibration
and additional setup is required for this option to work.
-NONE- will use no color matching. Select this option to use your own ICC profile using
the instructions in article 042721.
Ink Saturation
This option controls the amount of ink used when printing an image. The default
setting is 100%, which will provide the most accurate color matching. If the ink is not
drying fast enough or "bleeding", you can decrease the Ink Saturation to lessen the
amount of ink that is applied to the label.
Rotate 180 Degrees
Set this setting to Yes to print with the labels right side up as they exit the Printer.
Enable Bi-di
Set to "Yes" for fastest print speed. Requires an alignment print after every cartridge
change. Set to "No" for better quality print (in some cases).
Launch PrintHub
This setting will open the Primera PrintHub application.
Details
Select this setting to see current firmware and driver version information and other
printer settings.
To Next Page
Loading...
Need help?
General
