Printronix Auto ID T820 - Page 90

90
System > Control > Media Units
Determines if distances in the MEDIA section are displayed in inches or
millimeters.
In Inches
Inches are used.
In Millimeters
Millimeters are used.
Factory Default
In Inches
System > Control > Batch Counter
Displays the number of pages remaining to be printed in a print job on the
ONLINE screen message area. This feature is supported in PGL and ZGL
only.
Disable
Remaining pages is not displayed.
Enable
The number of remaining pages is displayed.
Factory Default
Disable
PGL Syntax
~EXECUTE;formname;[;FC][;ICNTn][;FCNTn]
ZGL Syntax
^PQ(#Pages)
WARNING
If the correct execute command is absent from the
print file, “0 Pages” will continually display on the
control panel.
System > Control > Feed Key Online
This option changes the functionality of the FEED key when the printer is
ONLINE.
Feed
When selected, pressing the FEED key causes the
printer to feed a form.
Reprint Last
When selected, pressing the FEED key causes the
printer to reprint the last printed form.
Factory Default
Feed