91
System > Control > Cancel Operation
This option determines if the LEFT SOFT key in the Home screen will be
used for “Cancel Data”. If so, then the LEFT SOFT key will be active when
there is data in buffer.
No option will be available to the user to Cancel Data
from the front panel.
Allow the “Cancel Data” operation to be used. When
executed, all data in the printer will be cancelled.
System > Control > Auto Locking
This option can force the front panel
ENTER key to return to the locked
status five minutes after the last key press.
The
ENTER key is not automatically locked. It
remains in its current state until locked manually or via
power-up.
The
ENTER key is automatically locked five minutes
after the last key press.
System > Control > Set Lock Key
Normally, to lock or unlock the printer menu, the up/down keys are pressed at
the same time. The Set Lock Key executable menu lets you choose different
keys to lock or unlock the printer menu. You may choose almost any group of
keys as the new lock and unlock keys. You cannot use the
ENTER key or
any key combinations which are already used for other functions. One or
more keys can used simultaneously.
The
ENTER key is used to start the sequence and
the user will be asked to select a new lock key.
After following all the instructions on the front panel
(including entering the new lock key twice to confirm),
the user will be informed the process was completed. If
not successful, then the user will alerted.
The new lock combination will remain even if the
printer is powered off and back on.
To Next Page
Loading...
