99
System > Printer Mgmt > PNE Port Number
This menu selects the port number that the printer expects PNE to connect
through.
System > Printer Mgmt > PNE Port Timeout
If PNE has not communicated to the printer within a timeout period, the PNE
session closes.
System > Printer Mgmt > Mgmt Port Number
This menu selects the port number that the printer expects the PXML or UCP
to connect through.
System > Printer Mgmt > Mgmt Protocol
Since PXML and UCP management protocols share the same Ethernet port,
only one can be active at a time. This menu selects the active Management
Protocol Interface, either PXML or UCP.
Printronix XML management protocol used to control
and manage the printer. See the XML Programmer
Reference Guide for more information.
The Universal Control Port that can be used for GPIO
or CST applications.
To Next Page
