Procentec ProfiHub B5 Plus - Alarm Relay on Events Change; Alarm Relay on Statistics Change

ProfiHub B5+ / B5+RD User Manual
_______________________________________________
Version 2.0 – July 2014 Page 33 / 56
ProfiHub-B5-Plus-Manual-EN.docx © PROCENTEC 2014 - Copyright - all rights reserved
3.3.5 Alarm Relay on Events change
The Alarm Relay on the ProfiHub can be switched on each Event described in paragraph 3.3.1. When
such an Event occurs, the Relay will be switched immediately without delay. The only Event that can
delay the switching of the Alarm Relay is the Lost event. See paragraph 3.3.8 for an explanation.
3.3.6 Alarm relay on Statistics change
The Alarm Relay on the ProfiHub can be switched (closed) on each change in Statistics, described in
paragraph 3.3.2. When such an (enabled) Statistic change occurs, the Relay will be switched
immediately without delay. The only Statistic that can delay the closing of the Alarm Relay is the Lost
event. See paragraph 3.3.8 for an explanation.