Prodigit 3260A Series - 3260 A Series GPIB;RS-232 C COMMAND LIST; Table 4-1 Gpib;Rs-232 C Setting Command Summary

38 PRODIGIT
4-3 3260A Series GPIB/RS-232C COMMAND LIST
Setting Command
Function Command Format
SET AUTO FREQUENCY
DETECT ON/OFF
AFREQ{SP}{0|1|OFF|ON}{；|NL}
SET SYNC ON/OFF SYNC{SP}{0|1|OFF|ON}{；|NL}
SET SENC ON/OFF SENS{SP}{0|1|OFF|ON}{；|NL}
SET WATT ON/OFF WATT{SP}{0|1|OFF|ON}{；|NL}
SET BANK BANK{SP}{d}{；|NL} d：0 ～ 10
SET WAVE WAVE{SP}{m}{；|NL}} m：0 ～ 4
SET FREQUENCY FREQ{SP}{NR2}{；|NL} NR2：＃＃＃.＃＃＃＃＃
SET VOLTAGE LOW LIMIT VL{SP}{NR2}{；|NL}
SET VOLTAGE HIGH LIMIT VH{SP}{NR2}{；|NL}
SET CURRENT LOW LIMIT IL{SP}{NR2}{；|NL}
SET CURRENT HIGH LIMIT IH{SP}{NR2}{；|NL}
SET WATT LOW LIMIT WL{SP}{NR2}{；|NL}
SET WATT HIGH LIMIT WH{SP}{NR2}{；|NL}
SET VA LOW LIMIT VAL{SP}{NR2}{；|NL}
SET VA HIGH LIMIT VAH{SP}{NR2}{；|NL}
SET CURRENT
CURR：
{LOW|HIGH|A|B}{SP}{NR2}{；|NL}
NR2：＃＃＃.＃＃＃＃＃
SET RESISTANCE
RES：{LOW|HIGH|A|B}{SP}{NR2}{；
|NL}
SET LINEAR CURRENT LIN：{A|B}{SP}{NR2}{；|NL}
SET LOAD ON/OFF LOAD{SP}{0|1|OFF|ON}{；|NL}
SET LEVEL LOW/HIGH LEV{SP}{0|1|LOW|HIGH}{；|NL}
SET PRESENT ON/OFF PRES{SP}{0|1|OFF|ON}{；|NL}
SET MODE MODE{SP}{0|1|2|CC|CR|LIN}{；|NL}
SET STORE STATE STORE{SP}{m}{；|NL} m：1 ～ 5
SET RECALL STATE RECALL{SP}{m}{；|NL} m：1 ～ 5
SET REMOTE STATE REMOTE{；|NL} Omly RS232 cmd
SET LOCAL STATE LOCAL{；|NL} Omly RS232 cmd
Table 4-1 GPIB/RS-232C SETTING COMMAND SUMMARY
REMARK :
1. CURRENT ENGINEERING UNIT : A
2. VOLTAGE ENGINEERING UNIT : V
3. RESISTANCE ENGINEERING UNIT : Ω