2.2.3. Launch Kit
For the initial setup of the device, an additional launch kit with the following components is available for ordering:
Table 7. CANlink wireless 4000 Launch kit (part number 253000187)
Material Qt
y
CLW4K Starter Cable 6open 2dsub 1pw 2m 1
Cable MTII 14pin code1 open 2m 1
ANT WLDB DA 2M0 FAKRA-I FA 1
CANview USB 1
USB cable (CANview USB) 1
CAN bus terminator D-Sub/D-Sub, 120¬ 1
Power supply unit 1
Mounting kit M6 Enclosure GH0806 1
CANlink Connector Kit 1
CANlink wireless 4000 Device Manual
To Next Page
Loading...
