7.3. Cleaning
NOTICE
Risk of property damage
Damage to the device due to water penetration
- The device was tested against water jets according to IPxK6 of ISO 20653 standard. Different
loads, e.g., with a pressure washer or a higher flow rate, do not correspond to the intended use.
- Never clean the CANlink wireless 4000 device with a pressure washer or similar.
To avoid damage caused by penetrating liquids, no high-pressure cleaners may be used for cleaning. In order to
remove contamination, you should also avoid using jet water if possible. Instead, use a damp cleaning cloth with a
solvent-free and acid-free cleaning liquid.
8. Packaging and Transport
This chapter contains information on packing and transportation.
NOTICE
Risk of property damage.
- Only store and transport the device in a temperature range of -40°C … +80°C / -40°F … +176°F.
9. Disposal
This chapter contains information on correct disposal.
NOTICE
Observe local regulations for disposal of the device, the accessories and the packaging material.
9.1. Regulations in the European Union
According to the Directive on Waste Electrical and Electronic Equipment (WEEE), the device
must not be disposed of in household waste. Take the device to a collection point for waste
electrical and electronic equipment for correct disposal.
10. Annex
This chapter contains technical data and certificates.
10.1. Technical Drawings
INFORMATION
You can download the most relevant CAD files from our Download Center.
CANlink wireless 4000 Device Manual
To Next Page
Loading...
