5. Getting Started
This chapter describes the first steps that are required for the initial commissioning of the device. Furthermore, it
contains useful information on how to connect, configure, and mount the device.
5.1. Installing Software
Use the CANlink wireless configurator software to configure the device.
You can evaluate the transmitted data with the Remote Service Tool software or the RM CAN-Device Monitor. The
Dashboard app enables you to display data on a smartphone (Android).
Use the Proemion Firmware Programmer software for firmware updates.
The software can be downloaded from our Download Center at the Document Library
Table 21. Software
Software Path on Download Center
CANlink wireless configurator 01_Proemion_Devices\03_CANlink wireless 4000\04_Software
USB driver 05_Utilities\06_USB Drivers
Remote Service Tool software 03_Proemion Tools Software\01_Software\04_Remote Service Tool
Dashboard App Dashboard App on Google Play
RM CAN-Device Monitor 05_Utilities\01_RM CAN Device Monitor
Proemion Firmware Programmer 03_Proemion Tools Software\01_Software\02_Proemion Firmware Programmer
Execute the relevant application file (setup.exe, install.bat or similar) and follow the instructions on the screen
to install the software on your PC.
CANlink wireless 4000 Device Manual
To Next Page
Loading...
