PROEMION CANlink wireless 4001 - Page 31

4.1.5. Use Cases Overview
The following table shows the possible applications with the CANlink wireless.
(P2P is the abbreviation for point to point connection)
Table 11. Use Cases
Application Connectio
n Method
Remarks Client Software
CAN – Mobile Device /
PC Interface, P2P
connection
Bluetooth
Classic
- Proemion Dashboard App for Android, 3rd Party
App for Android or iOS via Byte Command
Protocol API, Remote Service Tool software
CAN – Mobile Device /
PC Interface, P2P
connection
WLAN
Access
Point mode
- Proemion Dashboard App for Android, 3rd Party
App for Android or iOS via Byte Command
Protocol API, Proemion Dashboard Software
CAN – Mobile Device /
PC Interface, P2P
connection
WLAN
Infrastructur
e mode
WLAN Infrastructure Mode
requires an external
Access Point
Proemion Dashboard App for Android, 3rd Party
App for Android or iOS via Byte Command
Protocol API, Remote Service Tool software
CAN – CAN Bridge
P2P connection
Bluetooth
Classic
Recommended
communication technology
for CAN-CAN bridge
n.a.
CAN – CAN Bridge,
P2P connection
WLAN
Access
Point mode
- n.a.
CANlink wireless 4000 Device Manual