Profichip VPC3+C - Mode Register 2 Details

ASIC Interface 5
5.1.3 Mode Register 2
Setting parameters for Mode Register 2 may take place in the Offline
State only (like Mode Register 0).
Bit Position
Address
7 6 5 4 3 2 1 0
Designation
0 0 0 0 0 0 0 1
Reset Value
0CH
4kB_Mode No_Check_ Prm_Reserved SYNC_Pol SYNC_Ena DX_Int_Port DX_Int_Mode No_Check_ GC_Reserved New_GC_ Int_Mode
Mode Reg 2
7 .. 0
VPC3+C User Manual
Revision 1.03 23
Copyright © profichip GmbH 2004-2006