7
Replacing the battery
The supplied lithium battery has already been inserted into the remote control. Pull out the protective sheet before use.
If the remote control stops working, follow the procedures below to replace the battery with a new one.
1. Place the Remote Control with the buttons facing downward.
2. While pressing the movable left part of the battery cover to the right, pull the tray out.
3. Place a CR2025 lithium battery on the tray with the positive + symbol face up.
4. Close the tray.
Note: Please ensure that the batteries are disposed of in accordance with local environmental legislation.
Getting Started
Connecting the power cable
1. Fix the Photo Frame stand into the slot at the back of the unit so that it is stands up.
2. Use the supplied power adapter to connect the digital photo frame to an electrical outlet.
Choose the plug you need (UK or EU) and attach it to the adapter.
3. Slide the power switch on the back of the photo frame from OFF to ON.
Note:
y You can leave the power switch on, and use the [
] button on the remote control to turn the frame on or to standby mode.
y To turn off the power of the Digital Photo Frame completely, slide the power switch from ON to OFF.
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General