12
Running a slideshow
In any mode, press the [ ] button to start a slideshow.
To pause the slideshow and view a single picture, press the [OK] button. To resume the slideshow, press the [OK] button again.
Note:
y Press the [MENU] button to exit the slideshow and return to the main screen.
y Press the [
2
] button to exit the slideshow and view the pictures in thumbnail.
Viewing thumbnails
The pictures on the selected memory source can be displayed on the screen as thumbnails. Up to 15
pictures are displayed at a time.
1. Select a memory source (e.g. USB, SD/MMC) in the main screen and press the [OK] button.
The mode menu appears.
2. Press the [W] or [X] buttons on the remote control to select Photo, and press the [OK]
button. The pictures are displayed on the screen as thumbnails.
3. To navigate through the thumbnails, press the [S], [T], [W] or [X] buttons on the remote
control.
4. To switch to next or previous page to display another set of photos, press the [
] or []
button.
Note: You can also press the [
2
] button from a slideshow or a single view to return to the thumbnails view.
Downloaded from www.vandenborre.be
To Next Page
Loading...