10
Viewing the first slideshow
Once you switch on the digital photo frame with no memory device inserted, the preloaded photos
are used for the slideshow.
When a memory device is inserted into the Digital Photo Frame, it switches to the main menu and
the corresponding icon appears.
Use the [W] or [X] buttons on the remote control to select a memory device, and press the [
]
button to start a slideshow of the selected device.
Note:
y The slideshow will start automatically after inserting a memory device when in the main menu or when you power the photo frame on and a
memory device is inserted already.
y If several memory devices connect to the frame simultaneously, the Digital Photo Frame will read the memory source by the priority order:
USB, CF, SD/MMC/MS.
Downloaded from www.vandenborre.be
To Next Page
Loading...