The
‘System’
menu splits into the following sub-menus:
1 -
‘Dosing head’
2 -
‘Volume unit’
3 -
‘Pressure unit’
4 -
‘Pressure adjustment’
5 -
‘Start behaviour’
11.2.7.1
‘Dosing head ’
‘Menu / Information
è
Settings
è
System
è
Dosing head
è
...’
CAUTION!
– Should a different liquid end size be fitted, then
the pump must be reprogrammed in the
‘Dosing head’
sub-menu.
– Reprogram the pump to
‘No dosing head’
for
demonstration purposes or if operating without
feed chemical.
11.2.7.2 Volume unit
‘Menu / Information
è
Settings
è
System
è
Volume unit
è
...’
You can select another unit for the volume in the
‘Volume unit’
sub-menu.
11.2.7.3 Pressure unit
‘Menu / Information
è
Settings
è
System
è
Pressure unit
è
...’
In the
‘Pressure unit’
sub-menu, you can select another unit for the
pressure.
11.2.7.4 Pressure adjustment
‘Menu / Information
è
Settings
è
System
è
Pressure adjustment
è
...’
You can adjust the pressure value, which the pump displays in the
‘Pressure adjustment’
sub-menu, if it is to differ from the pressure
in the discharge line.
Set up /
‘Menu’
72
DosingPump.ir