3.3 If you wish to use a different group or want to program each day individually,
press the “Day/Time” key to select another group according to the following
sequence: Whole Week – Weekday – Weekend – Monday – Tuesday –
Wednesday – Thursday – Friday – Saturday – Sunday – Whole Week.
3.4 Press the “Up” or “Down” key to set the desired hour. Once set, press the
“Prog” key to save. The minutes will begin flashing.
3.5 Press the “Up” or “Down” key to set the desired minutes (in ten minute
increments). Once set, press the “Prog” key to save. The temperature setting
will begin to flash.
3.6 Press the “Up” or “Down” key to set the desired temperature (in 1˚F
increments). Once set, press the “Prog” key to save. The thermostat will
show the “DAY” set point time and temperature with the hour icon and
am/
m indicator flashin
.
To Next Page
Loading...