Chapter 2 Hardware Configuration
Prox-1635LF USER
′
S MANUAL
Page: 2-21
2-25. IRDA CONNECTOR
IRDA1 : IrDA (Standard IR) Connector
The pin assignments are as follows:
PIN ASSIGNMENT
1 VCC
2 NC
3 IRRX
4 GND
5 IRTX
2-26. CLEAR CMOS DATA SELECTION
JP1 : Clear CMOS Data Selection
The selection are as follows :
FUNCTION JUMPER SETTING
(pin closed)
JUMPER
ILLUSTRATION
Normal 1-2
Clear CMOS 2-3
*** Manufacturing Default is set as Normal.
Note: To clear CMOS data, user must power-off the computer and set the
jumper to “Clear CMOS” as illustrated above. After five to six
seconds, set the jumper back to “Normal” and power-on the
computer.
IRDA1IRDA1
To Next Page
Loading...
