Chapter 4 Award BIOS Setup
Page: 4-28
Prox-1635LF USER
′
S MANUAL
4-10. FREQUENCY/VOLTAGE CONTROL
Choose 〝FREQUENCY/VOLTAGE CONTROL〞 from the main menu,
a display will be shown on screen as below:
Phoenix – AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
Item Help
VIA C3 Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Clock
[Default]
[Enabled]
[Disabled]
[100]
Menu Level ►
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Frequency / Voltage Control Setup Screen
This setup menu allows you to specify your settings for frequency/voltage
control.
AUTO DETECT DIMM/PCI CLK:
This item allows you to enable or disable auto detect DIMM/PCI Clock.
SPREAD SPECTRUM MODULATED:
This item allows you to enable or disable the spread spectrum modulate.
CPU CLOCK:
Select Default or select a timing combination for the CPU and the PCI bus.
When set to Default, the BIOS uses the actual CPU and PCI bus clock
values.