VIBTOOL 02.2009
41
Measurement value
Unit of cavitation measurement
Symbol indicating
cavitation measurement
Cavitation measurements with VIBTOOL
During measurement keep the sensor firmly pressed
against the measurement point and keep it still - measure-
ment duration depends upon signal strength and stability:
the stronger and more constant the measurement signal is,
the quicker the display response will be.
Cavitation measurement display
The display below shows all the symbols which can appear
during a cavitation measurement. However, not all of these
symbols may appear simultaneously.
Measurement is OK.
OK indicates that the measure-
ment is complete and was
within defined stability limits.
Symbol indicating measurement
error (instable signal, etc.)
Cavitation measurement
To Next Page
Loading...
