VIBTOOL 02.2009
53
VIBTOOL accessories
The following pages describe a selection of the available
VIBTOOL accessories:
Spare temperature probe - VIB 8.605
The VIBTOOL temperature probe may be replaced quite
simply:
1. Rotate the temperature probe into the measurement
position.
2. Insert a 4 mm (1/8") screwdriver between the base of
the probe and the VIBTOOL housing (1).
3. Remove the temperature probe by sliding it gently in the
direction shown (2).
4. Gently insert the replacement probe into the socket in
the orientation shown.
ENT
ENT
1
2
Appendix
To Next Page
Loading...
