Chapter 4: Configuration
Motion Meter
71
Psion Omnii Hand-Held Computer User Manual
The Utilities tab can also be used to log heater control logic board information.
4.9.3 Motion Meter
Tapping on the Start button enables the Motion Meter feature. Once enabled, this applet records the
number of impacts the Omnii has sustained, the distance of the fall in meters, the duration in 10
ths
of a
second, and the date and time that the event occurred. The top 40 events are logged in a non-volatile loca-
tion and can be used for diagnostic purposes by Psion or the site administrator.
4.9.4 Settings
•Choose an Error Level from the drop-down menu.
• To change the location where debug information will be stored, tap on the button to the right of the
Log Folder option.
To Next Page
Loading...
