Chapter 4: Configuration
Error Reporting
Psion Omnii Hand-Held Computer User Manual
72
4.10 Error Reporting
Error Reporting allows you to enable or disable Microsoft error reporting prompts.
•Tap on Start>Settings>Control Panel>Error Reporting icon to access your options.
4.11 GPS (Global Positioning System) Settings
This applet allows you to define how the GPS module operates. You can determine when the GPS module is
powered and operating, and choose from a set of GPS profiles built into the modem. You can also set up the
AGPS Manager (an assisted GPS utility).
•Tap on Start>Settings>Control Panel>GPS Settings icon.
4.11.1 Power
This tab allows you to dictate how the GPS module behaves. The GPS Power drop-down menu is used to
control when the GPS is powered on and off.
• Off – the GPS module is left off, always.
• Always on – the GPS module is powered on at all times regardless of the power state of the hand-held
(suspend).
• On, and off in suspend – the GPS module is powered on, but if the Omnii is in suspend mode, the GPS
module is turned off.
To Next Page
