Ptotec 3300 - 13.0 Programming Overview; Access Levels and Zone Programming Options

93-530-70 Issue 0 Page 18 of 44 © Protec Fire Detection PLC 2007
13.0 Programming Overview
The 3300 has many programming features, making it extremely flexible. These can be accessed by
users at different authorisation levels. The programming features and authorisation levels are detailed
below.
13.1 Access Levels
Access Level 1 (User code not entered)
The panel’s front panel display indicators are visible, providing a clear status of the 3300 at that time.
The functions that may be performed at access level 1 are:
• Muting of the panel’s internal buzzer.
• Entry of the 5 digit user code to access level 2 functions.
Access Level 2 (User code entered)
Only authorised users are permitted access to level 2 functions, these are:
• Silencing an alarm condition.
• Sounding the alarms.
• Resetting the panel after an alarm activation.
• Testing the front panel indications, and internal buzzer.
• Programming a zone into test mode (only one test zone at once is permitted).
• Disablement of detector circuits.
• Disablement of alarm circuits.
• Disablement of any programmed delays (detector and fire link).
• Disablement of the fire link interface (if fitted).
www.acornfiresecurity.com
www.acornfiresecurity.com