93-530-70 Issue 0 Page 44 of 44 © Protec Fire Detection PLC 2007
34.0 Appendix 5. 3300 Programming Quick Reference Guide
FUNCTION Level Program
Indicator
Zone Indication
Test Mode 2 General Test Any one specified Zone
Test Mode 3 General Test Relevant Zones
Disable Zones 2/3 General Disablement Relevant Zones
Disable Alarms 2/3 Alarm Outputs Zone 1 – Circuits 1 and 2
Zone 2 – Circuits 3 and 4
Disable Delays 2/3 Alarm Outputs Zone 3
Disable Fire Link 2/3 Alarm Outputs Zone 4
Fire Link Delay 3 Alarm Outputs Zone 5
PSU Monitoring 3 Alarm Outputs Zone 6
Set Delayed Zones 3 Output Delay Relevant Zones
Set Coincidence 3 Level 2 Accessed Selected Zones
Set Non-Latching 3 Fire Link Operated Relevant Zones
Expansion
Interface
3 Fire Link Zones = Number of devices (in
Binary)
Please note that any changes to the system program are not permanently stored until button 4 has
been pressed at access level 2 (for level 2 programming functions) or access level 3 (level 3
programming functions).
www.acornfiresecurity.com
www.acornfiresecurity.com
To Previous Page
Loading...