5
2 Cautions and Warnings
IMPORTANT NOTICE
WARNING: CHEMICAL FEED
All electromechanical devices are subject to failure from a variety of causes. These include mechanical
stress, component degradation, electromagnetic fields, mishandling, improper setup, physical abuse,
chemical abuse, improper installation, improper power feeds, and exposure.
While every precaution is taken to insure proper functioning, extra precautions should be taken to limit the
ability of over-feeding by limiting chemical quantities available, secondary shut-downs, alarms, and
redundancy or other available methods.
CAUTION: POWER SOURCE AND WIRING
Low voltage wiring and high voltage (110 plus) should not be run in the same conduit. Always run
separately. Even shielded low voltage is not a guarantee of isolation.
Every precaution should be taken to insure proper grounding and elimination of shorting or
Electromagnetic field (EMF) interference.
WARNING: ELECTRICAL SHOCK
To reduce the risk of electrical shock, this equipment has a grounding-type plug that has a third
(grounding) pin. This plug will only fit into a grounding -type outlet. If the plug does not fit into the
outlet, contact a qualified electrician to install the proper outlet. DO NOT change the plug in any way.
3 Contact Information
We thank you for your selection and purchase of a Pulsafeeder product.
With proper care and maintenance, this device should give you many years of trouble-free service.
Please take the time to read and understand this Installation and Operation Manual, paying special
attention to the sections on OPERATION and MAINTENANCE.
If, in the future, any parts or repairs are required, we strongly recommend that only original
replacement parts be used. Our Customer Service Department is happy to assist you with your
parts or service requests.
Pulsafeeder Customer Service and Technical Support Departments can be reached by calling
(800) 333-6677 or faxing (941) 575-4085, Monday through Friday, 8:00 a.m. - 5:00 p.m. EST.
To Next Page
Loading...
Need help?
General
