Pulsar PS-1HCE - Pulsar Precision Duo

To Next Page

To Previous Page

Pulsar® Precision Operaon and Installaon Manual (Model PS-1HCE) Rev 2.0 04/2022

10.4 Pulsar® Precision Duo

Note: Refer to Figure 2 on page 7 for schemac.

Note: The two feeders operate as a single unit, so all feed and wash cycles are triggered

simultaneously. Because each feeder sll has its own control box, high level alarms are

sll individually registered.

Note: The 2 HP booster pump can be wired into either one of the Elite control modules for

tandem control.

Note: Bypass the ow switch on the second control box not wired to the booster pump. Refer

to Secon 10.2, Figure 13 for ow switch bypass schemac.

Part Descripon Quanty PartNumber

Dual Precision Includes two Precision feeders with individual control boxes, 2 HP booster

pump, 2” venturi, inlet and outlet connecon ngs for tandem feeder setup

73290

BoosterPumpandElectricalComponents

Booster Pump 2 HP Booster pump, 230V, 10.4 Amps, 2 x 2 NPT, Pentair Challenger 345218 1 73401

2” Unions 2” x 2” union kit, Pentair part# 345218 1 73402

ORP Feed Splier Power cord splier, NEMA 5-15P to 2x NEMA 5-15R, customer sourced 1 N/A

Flow Switch Flow Switch 24VAC/DC, SS 1/2" NPT (SC050R) 1 206036

InletFlowConnecontoDualFeeders

Reducing Tee 2” x ½” slip Sch 40 1 73403

Nipple ½” NPT nipple threaded on one end 1 73404

Feeder Inlet Tee ½” NPT Sch 80 1 205542

Tubing Connector ½” (12.7 mm) O.D. Tubing Connector, W8MC8 2 71890

Flow Meter 0.5 – 5.0 gpm ow meter, ½” NPT 2 74720

VenturiandSuconConneconfromDualFeeders

Venturi

Mazzei 2081-A PP, 2.0” Male NPT Inlet/Outlet, 1.25” Male NPT Sucon Port,

Black Polypropylene

1 73405

Venturi Unions 2” slip x FNPT PVC unions 2 73406

Venturi Sucon Tee 1 ¼” NPT Tee 1 73407

Reducing Bushing 1 ¼” MNPT x ½” FNPT

2 73408

Tubing Connector ½” (12.7 mm) O.D. Tubing Connector, W8MC8

2 71890