If without handling tools must have more than 4 men to handling with it.
The rack must be fixed on the basement and carriage on the wall with M10 screws.
3.5.2. Mechanical Installation of the battery rack
Battery rack basement holes bitmap (unit: mm):
Battery rack wall fixed holes bitmap (unit: mm):
Warning: The battery rack is IP00. It must be installed in a restricted access area;
Warning: The PowerCube-H1/H2-V2 is high voltage DC system, operated by qualified and
authorized person only.
3.5.1. Installation Notes
3.5. Mechanical and Electrical Installation
Front side
22
/
42
To Next Page
Loading...
