14
Connecting the hob
Insert the plug located at the end of the hob’s cable bundle into the respective sockets on
the oven switch panel.
WHEN THE OVEN IS FIRST INSTALLED
Remove all the baking trays and oven racks.
Set the ‘Heat Setting’ to maximum level.
Function button in the upper and lower heating (if you have the fan) turn the function.
Turn the oven for 30 minutes in this way.
During this time, elements from the oven and heat insulating material and a smell of
smoke may occur only once. If such a situation occurs, before you put food in the
oven justwaiting to be no odor and smoke.
Repeat this process in the grid element.
These processes inside the oven when slightly damp cloth and wipe clean with a
softcloth.
WARNING: Before the rst use, carefully wash the accessories of the oven such as
tray and wire grid.
IMPORTANT: To open the door; always catch the handle in its central part. (See
Figure 6)
Figure 6
To Next Page
Loading...
